The products shown on our website are just a sampling of hundreds of products that
we manufacture. If you don't see what you need, contact us. Chances are we already have a product that is just right.
If not, we can custom formulate a product to meet your exact requirements. Before making your final product selection, we strongly advise
that you contact an Axel's Technical Service Representatives at 800-332-AXEL or 718-672-8300 for expert
guidance, and a free sample of the solution that is perfect for you.
MoldWiz internal lubricants are incorporated directly into the melamine, phenolic, or urea resin. There are specific types for aqueous and
non-aqueous resin systems. They contribute to improved wetting properties of the paper or substrate and function as release agents allowing the
laminate to release easily and cleanly from the caul plates without leaving any residue. MoldWiz
internal lubricants contain no silicone, no wax, and no metallic stearates. They will not
interfere with adhesion properties between laminates.
Product
For use with these resins:
INT-4E-18CC, INT-2443, INT-2432, INT-2445
Melamine
Urea
Phenolic
INT-AM150
Melamine
Urea
Phenolic
Acrylic
INT-1312MS, INT-25LF
Phenolic
INT-1846N
Phenolic
Epoxy
INT-1858
Phenolic
Hybrid
Product
Active Ingredients
Specific Gravity
Viscosity(cps) @ 25C
PH
INT-2E/ATS (1)
16-22%
1.00
< 300
10.0
INT-25LF
100%
1.00
700 - 1300
8.75
INT-AS-1724 (4)
100%
0.910
< 300
9.0
INT-1858
100%
1.02
800 - 1400
N/A
INT-2432
23 - 27 %
1.02
< 250
8.5
INT-1846N
100%
1.05
400 - 1200
N/A
INT-4E-18CC
49 - 53%
1.03
100 - 400
9.5
INT-2445 (3)
45 - 51 %
0.945
< 500
8.5
INT-1850HT
100%
1.02
250 -450
N/A
INT-1312MS
100%
0.95
700 - 1300
n/a
INT-2443 (2)
36 - 40 %
0.974
< 500
8.5
INT-AM150
24.5 - 26.5%
1.015
< 100
9.5
INT-1854
100%
0.99
300 - 700
N/A
INT-1830PN
100%
0.930
< 100
5.0
1-Release and anti-scuff formulation 2-Release and anti-block formulation 3-Antiblock 4-Anti-stat
For best results, laboratory tests or pre-production trials should determine
the optimum addition level. MoldWiz internal lubricants are effective within a range of 1 to 10
parts per 1000 resin based on solids of internal to solids of resin.
All Axel products are formulated from raw materials that comply with chemical substance inventory lists of TSCA, DSL, MITI, EINECS, Australia, and Korea.
